Atelier 100architecture slots contemporary house into French medieval city centre

Rue Losserand by atelier 100architecture

This small house in the French city of Tours by local architecture office Atelier 100architecture features a material palette of zinc panels, plaster and wooden boards that references its historical neighbours.

Rue Losserand by atelier 100architecture

The house on Rue Losserand was designed by Mathieu Julien of Atelier 100architecture for a couple who wanted to create a rental property in the city’s ancient centre, and takes its visual cues from the materials used in structures nearby.


Related story: Noel Dominguez inserts timber cube house into Parisian garden


The sensitive location also necessitated a quick and dry construction so the architect worked with an engineer to develop a timber frame that avoids the use of structural metal and wet concrete.

Rue Losserand by atelier 100architecture

«We had to make a building that was discreet and the construction process had to be very clean so it didn’t disturb the surroundings,» Julien told Dezeen.

Rue Losserand by atelier 100architecture

The front wall of an existing single-storey flat-roofed garage was retained at the base of the new residence, which contains three storeys each of 20 square-metres.

Rue Losserand by atelier 100architecture

The architect added a window in the wall looking onto the street and clad the structure above in zinc panels with a similar tone to the roof tiles of nearby buildings.

Rue Losserand by atelier 100architecture

Plasterboard panels were left exposed on the gable end of the upper storey, which the architect said was a response to the planning authority’s request for a «less massive» detail than the proposed metal finish.

Rue Losserand by atelier 100architecture

A section of the street-facing facade on the first floor is covered with pine cladding that denotes the position of the bedroom and continues the building line of the neighbouring homes.

Rue Losserand by atelier 100architecture

The same pine wood is used to entirely cover the rear facade for reasons of «budget and simplicity» and to create a homogenous surface, which is interrupted only by windows and the home’s main entrance.

Rue Losserand by atelier 100architecture

The doorway opens into an open-plan tiled living area with a fitted kitchen on one side and toilet on the other.

A staircase rising up one side of the building is built from rough construction planks with pine boards applied vertically to create a simple balustrade.

Rue Losserand by atelier 100architecture

Large gaps between the vertical boards allow daylight to penetrate the stairwell from a narrow vertical window at first floor level.

The master bedroom and main bathroom are located on the first floor, with two smaller rooms fitted beneath the eaves on the upper storey.

Photography is by Brice Desrez.


Project credits:
Masonry: Cazy-Guillaume (Tours)
Carpenter: Merlot (Richelieu)
Plaster: Plakisodeco
Electrician/heat: Munch-Polge

Rue Losserand by atelier 100architecture
Diagram – click for larger image
Rue Losserand by atelier 100architecture
Ground floor plan – click for larger image
Rue Losserand by atelier 100architecture
First floor plan – click for larger image
Rue Losserand by atelier 100architecture
Loft plan – click for larger image
Rue Losserand by atelier 100architecture
Section – click for larger image
Updated: 27 октября, 2014 — 8:18 дп