The standard stipulates that each delivery ticket should furnish at least the following information:
• Name of the manufacturer and mixing plant
• Mix identification code
• Designation of the mixture in the format
SMA D binder
where D is the maximum aggregate size in millimeters and binder is the binder type. For example, SMA 11 50/70 denotes an SMA mixture with a gradation up to D = 11.2 mm, with the road binder 50/70 (according to EN 12591).
Apart from the aforementioned information, a manufacturer should also provide the following: [73]
• Details regarding the compliance of a mixture with requirements concerning resistance to fuel and resistance to deicing fluids (if the delivery applies to an airfield)
• Details of additives used
