Restoration of enamel of a bath
Enamel restoration – trudozatratny, but easy procedure, which completely under force to the newcomer. But, for this purpose, to make everything from the 1st time, it is necessary to do in the beginning everything truly…
The 1st stage – removal of zarzhavely smudges. A rust clean slaborazogrety shchavelny acid mixed with water in a proportion about 40/60 to a kasheobrazny condition. Solution put by means of a fabric or porolonovy tampon. In half an hour the acid fur coat watches off. Washing after chemical processing should be laborious, on another brand new enamel will badly keep.
If after that procedure on a bath there were zarzhavely spots, after a podsykhaniye it is possible to process in addition a surface a nazhdachka.
The 2nd procedure – drawing on a first coat surface. Aerosol first coats in a system and household shops – a stately large quantity therefore it is voobshchy not discrepancy. It is necessary to hold in the head that with аэрозолью before application it is necessary 2-3 to shake bottles minutes. The first coat is put with a narrow layer moderately on all surface of a bath. Upon termination of it is necessary to allow to a layer to dry out.
The last part – enamel selection. Truly to choose enamel to you selling assistants will promote. Enamel can be as Russian production, and imported. The best option for baths – dense "can" nitroenamel. Unlike enamel in aerosol cylinders, it does not contain huge amount of solvent which negatively influences paint.
Bath surface laboriously rub clean fabric tampons in 2-3 layers. Before drawing of the subsequent layer, previous should dry out within half an hour. It is necessary to hold in the head that if in a bathroom the highest humidity (from 60 %), paint can crack or become covered by spots therefore before works we drain air by means of a reflector.
It is necessary to moisten the top layer of enamel with solvent (having cleaned a reflector). Partly dissolving enamel it is promptly leveled as a result there is a semi-glossy rovnenky layer of a film. Enamel absolutely dries approximately every other day. At desire then the surface can give light, having polished with polishing paste.