Process of installation of an acrylic (plastic) bath practically differs nothing from bath installation from steel. Difference that the most part of models fasten not on bolts or a samokleyka, and are fastened саморезами to a bath bottom.
There are 3 methods of installation of an acrylic bath: installation on a frame or legs, installation on the "brick", the combined installation. The most reliable – the 2nd and 3rd method because established such makary bath, actually is not exposed to deformation.
Let’s make out any of methods.
Bath installation on legs – more quick and usual method. To the bottom, fasten adjustable legs, c which help an acrylic bath expose on level. To do a bias along the edges at all this it is not necessary, the bath form already foresees a bottom bias.
Further to a wall strengthen special hooks, with the help which the board of an acrylic bath will not cave in and depart.
The last штришок – installation of the screen closing a place with a side and under a bathroom.
Bath installation on a brick, till speed, not that quick, but on indicators much more reliable. This type of installation is used, if legs do not go complete with a bathroom.
To establish an acrylic bath on a brick – it is easy. The basis on which the bath is put is under construction of bricks. The basis should be established so that between a bottom and a bathroom there was a distance in centimeter. After measurements the partition with auditing windows is under construction. Further, when cement will seize, a bath establish on "box", and an opening between a laying from a brick and boards – "blow" assembly foam. Then in a bath gather water that foam nestled under weight, and a gap between the basis and it was pressurized.
The combined installation.
This type of installation is an association of the 2nd above-mentioned methods. Installation of a bath becomes on factory legs, and then is duplicated by a brick.
On perimeter between a wall and a bathroom it is advised поклеить a silicone strip which загерметизирует connections and not from spoils the esthetic. The auditing dverka can be established by means of silicone, without necessity of drilling of openings.
